IO Mabe IOB150BB Manuel D'utilisation page 69

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
PROBLEM
The door will not
close properly.
Moisture build up on
interior or exterior
of the Beverage cooler.
Error Code:
E1-E2-E3-E4-E7-E8
POSSIBLE CAUSE
.
The cooler is not level.
The door was reversed and
not properly installed.
.
The gasket is dirty.
The shelves are out of
position.
This is normal during high
humidity periods.
.
This is normal in high
temperature environment.
Prolonged or frequent door
openings.
The door does not seal
completely.
A sensor has failed.
.
Level the cooler.
Re-install the door properly.
Clean the door gasket.
Place the shelves properly.
.
Lower the room humidity.
Move the cooler to a cooler
place, and avoid heat and
sunlight.
Open the door less often.
Check door gaskets
for proper seal.
.
Contact the customer service
SOLUTION
.
.
.
.
.
11.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Iob150ss

Table des Matières