IO Mabe IOB150BB Manuel D'utilisation page 68

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
PROBLEM
The compressor turns
on and off frequently.
The light does not work.
Vibrations.
The cooler seems to
make too much noise.
10.
POSSIBLE CAUSE
.
The temperature has not
been set correctly.
The door is not closed
completely.
.
The door gasket does not
seal properly.
Not plugged in.
The circuit breaker tripped
or a blown fuse.
The light button is "OFF".
The cooler is not leveled.
The bottles are vibrating.
There is an object under
the cooler.
The cooler is not level.
Normal noise from the flow
of the refrigerant.
.
Press
check the set temperature,
and set the temperature
Close the door properly.
Check the door gasket.
.
Clean or change gasket
if necessary.
Plug the cooler in.
.
Check the breaker
and/or fuses.
Press
ON.
Make sure the bottles don't
touch each others.
Remove the object
under the cooler.
.
Remove the object under
the cooler.
The cooler is not level.
.
The rattling noise may come
from the flow of the
refrigerant, which is normal.
.
As each cycle ends, you may
hear gurgling sounds caused
by the flow of refrigerant in
your cooler. Contraction and
expansion of the inside walls
may cause popping and
crackling noises.
SOLUTION
either or
to
.
.
.
.
to turn the light
.
.
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Iob150ss

Table des Matières