La Sommeliere MZ135DZ Manuel D'instructions page 35

MZ180TZ control panel
(Upper control panel)
RUN light: indicator light of compressor working. While the compressor operating, the red light is on.
While it stops operating, the red light is off.
SET button: temperature setting button; Once you press the button, the temperature increases 1℃ or
1℉. Setting range is between 5℃~20℃ (41℉~68℉).
(Middle and lower control panel)
RUN light: indicator light of compressor working. While the compressor operating, the red light is on.
While it stops operating, the red light is off.
UPPER CHAMBER: display of the actual temperature of the upper chamber.
LOWER CHAMBER: display of the actual temperature of the lower chamber.
°C / °F light: when the ℃ light is on, it indicates Celsius temperature; When the ℉ light is on, it
indicates Fahrenheit temperature. °C / °F button: Celsius and Fahrenheit conversion button.
Button operation
SET button of the middle chamber: temperature setting button. Once you press the button, the
temperature increases 1℃ (34℉). Setting range is between 5℃~12℃ (41℉~54℉).
SET button of the lower chamber: temperature setting button. Once you press the button, the
temperature increases 1℃ (34℉). Setting range is between 12℃~20℃ (54℉~68℉).
LIGHT: Key to turn on / off the light.
When you press the button once, the permanent illumination automatically is on.
ON/OFF button: power on and off button; Press the button, it starts; press it again, it stops.
Note: The compressor will start to work about 5 minutes after it is power connected or powered off.
The temperature inside the cabinet will fluctuate and influence the refrigerating effect if the
surrounding temperature is too high or too cold.
35