Attaching The Dome Cover; Replacing The Lens - Sony IPELA SNC-DF40N Manuel D'installation

Notes
• When adjusting the lens position, be sure
that the "MUP" mark on the angle adjuster
is toward the ceiling. If the camera is
installed with the "MUP" mark toward the
floor, the image appears upside down.
• If it is difficult to tighten the zoom lever or
focus lever, turn the lens a little with the
slip mechanism and try again.

3 Attaching the Dome Cover

1
Put the cover on the camera so that the
transparent part A of the cover aligns
with the lens position to ensure proper
shooting.
2
Push the cover onto the camera until it
clicks.
3
Secure the dome cover with the
supplied dome cover screw.

Replacing the Lens

Applicable lens (CS-mount lens)
Contact your Sony dealer for information on
applicable lenses.
Attaching a lens
1
Remove the lens plug.
2
Turn the lens counterclockwise to
remove it.
Installing the Unit
15
GB