Mellerware Tasty! Mode D'emploi page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
To attach the jug, fi rst put the lid on
it and turn the lid clockwise until it
clicks into place. (Fig. 5).
Now place the jug onto the
appliance's base unit. The bottom
mark on the jug has to align with
the mark on the central unit (Fig.
6). You will hear a click when the
container is fi tted correctly to the
base of the appliance.
Finally, place the measuring beaker
in the lid.
To take the jug off the central unit,
press the release buttons on the
bottom of the both side handles
and remove the container. (Fig. 7)
IMPORTANT: for safety purposes,
the appliance stops when the lid is
opened.
Control panel (K)
Time setting (2)
Pressing this button activates the
time selection function (from 5
seconds to 90 minutes).
NOTE: if no operating time is
selected, the appliance will switch
off automatically after 90 minutes.
Temperature setting (3)
Pressing this button activates the
temperature selection function
(30-120 °C).
The temperature indicator (1) will
fl ash. To select the temperature,
turn the selector knob (8).
NOTE: the appliance will only start
heating after the time and speed
have been programmed. The Pulse
function will remain inactive
in this case.
EN
ES

Publicité

Table des Matières
loading

Produits Connexes pour Mellerware Tasty!

Table des Matières