Assembling The Appliance - Mellerware Tasty! Mode D'emploi

Do not put the appliance away if it
–
is still hot.
Keep the appliance in good
–
condition. Check that the moving
parts are not misaligned or locked
and make sure there are no broken
parts or problems that may prevent
the appliance from operating
correctly.
To ensure correct operation, keep
–
the base of the jug, its locating
pins, and the connectors on the
central unit clean.
Always use this appliance,
–
its accessories and tools in
accordance with these instructions,
taking into account the work
conditions and the work to be
done. Never use the appliance
for purposes other than those for
which it is intended, as this could
be dangerous.
Periodically check the state of the
–
lid seal.
Check that the lid is closed
–
properly before switching on the
appliance.
Do not open the lid while the liquid
–
contained inside the container
is boiling.
Be careful when pouring hot liquids
–
into the container, as they may
splash back due to a sudden
emission of steam.
Exercise caution after the
–
appliance stops, as the blades
continue to rotate due to
mechanical inertia.
Do not use the spatula if the
–
blades are still spinning.
Use
Before use
Make sure that all the product's
–
packaging material has been
removed.
–
Before using the product for the
fi rst time, clean the parts that will
come into contact with food in the
manner described in the cleaning
–
section.
Prepare the appliance according
to the function you wish to use.

Assembling the appliance

Jug lid (B)
The lid is used to close the jar and
–
activate the safety sensors in order
to start the appliance.
The hole in the lid is used to
–
introduce food, the spatula to stir
the food, and as a holder for the
measuring beaker.
The silicone seal (C) prevents
–
liquids from escaping between the
jar and the lid. Fit the silicone seal
in place, checking that it is seated
correctly. (Fig. 1).
EN ES