Mellerware Tasty! Mode D'emploi page 19

When fi tting the silicone seal, make
–
sure that the thin side is in contact
with the lid.
IMPORTANT: Never use the lid if the
–
seal is not fi tted correctly.
IMPORTANT: Never open the jug lid
–
while the appliance is in operation,
as there is a danger of the
contents escaping and/or burns.
Before opening the jug lid, stop the
appliance and wait until the blades
come to a standstill.
Blades (D)
The blade seal (E) prevents liquids
–
from seeping out and damaging
the appliance. It must be fi tted to
the blade before fi tting the blades
inside the jug.
Place the blade seal at the bottom
–
of the blade. Insert the blade in
through the hole on the bottom of
the jug so that it fi ts correctly.
(Fig. 2)
Use one hand to hold the top of the
–
blade and the other hand to grip
the tensioner (G). Fit the tensioner
on the bottom of the blade and
turn it clockwise. (Fig.3).
To remove the blades, turn the
–
tensioner anti-clockwise. Hold the
blade by the top and carefully pull
it upward. (Fig. 4)
Jar (F)
The jug has a maximum capacity
–
of 2 litres.
CAUTION: The surface of the jug
–
may reach very high temperatures
during operation. Do not touch
the jug with bare hands
during operation.
EN ES