How To Use The Appliance - Philips HR2828 Mode D'emploi

ENGLISH
6

How to use the appliance

1
Wash the fruit and/or vegetables and cut them into pieces that fit
into the chute.
2
Switch the appliance on by pressing the on/off switch.
The appliance will only function if the jug and the lid have been
properly mounted onto the motor unit.
C
3 Put the pieces in the chute and press them gently down with the
pusher.
Do not exert too much pressure on the pusher; this could affect the
quality of the end result and it could even cause the sieve to come to a
halt.
Never put an object or your fingers in the chute.
4
When the flow of juice into the jug has stopped, switch the
appliance off and wait until the sieve has stopped rotating
completely.
Do not fill the jug beyond the MAX indication to prevent juice from
being spilt. If you want to extract a large quantity of juice, empty the jug
at a certain point during the process.
Do not let the appliance run continuously for more than two minutes. If
you have not finished extracting juice, switch the appliance off and allow
it to cool down for two minutes before you continue.
C
5
Pour out the juice.
It is not necessary to disassemble the juice extractor.
If the pulp container is full:
1
Switch the appliance off and wait until the sieve has stopped
rotating completely.
2 Empty the pulp container.
3
Reassemble the juice extractor and continue.