Electromagnetic Fields (Emf); Before First Use; Preparing For Use; English - Philips Jamie Oliver HR1055 Mode D'emploi

- Never use your fingers or an object (e.g. a spatula) to push ingredients down the feeding tube
while the appliance is operating. Only use the pusher for this purpose.
- Never reach into the feeding tube while the appliance is operating.
- Be very careful when you handle the discs. Be especially careful when you remove them from
the Cutting Tower bowl, when you empty the bowl or when you clean it. Their cutting edges
are very sharp.
- Do not grab into the feeding tube or bowl with spout while the appliance is plugged in.
caution
- The appliance is intended for normal household use only. It is not intended for use in
environments such as staff kitchens of shops, offices, farms or other work environments.
Nor is it intended to be used by clients in hotels, motels, bed and breakfasts and other
residential environments.
- Switch off the appliance before you detach any accessory.
- Unplug the appliance immediately after use.
- Always switch off the appliance by turning the control knob to 0.
- Wait until moving parts stop running before you remove the lid of the appliance
- If the appliance is used improperly or for professional or semi-professional purposes or if it is
not used according to the instructions in the user manual, the guarantee becomes invalid and
Philips refuses any liability for damage caused.
- Never use any accessories or parts from other manufacturers or that Philips does
not specifically recommend. If you use such accessories or parts, your guarantee
becomes invalid.
- Always place the appliance on a dry, flat and stable surface.
- Do not use the appliance or any of its parts in the microwave.
- Only use a moist cloth to clean the base of the appliance.
- Do not move the appliance while it is operating.

Electromagnetic fields (EMF)

The appliance complies with all standards regarding electromagnetic fields (EMF).
Built-in safety lock
This feature ensures that you can only switch on the appliance if you have properly assembled the
bowl with spout and the lid with feeding tube on the motor unit. If the bowl with spout and the lid
with feeding tube are correctly assembled, the built-in safety lock will be unlocked.

Before first use

1 Remove all packaging materials from the appliance.
2 Thoroughly clean the parts that come into contact with food before you use the appliance
for the first time (see chapter 'Cleaning').

preparing for use

1 Let hot ingredients cool down before you process them (max. temperature 80°C/175°F).
2 Cut the ingredients into pieces that fit into the feeding tube. Make sure that the pieces are
not too big to prevent them from getting stuck in the feeding tube.
3 Put the motor unit on a flat and stable surface.
4 Put the bowl with spout on the motor unit (1) and turn it clockwise (2) to fix it
('click'). (Fig. 2)
5 Place the tool holder in the bowl with spout (Fig. 3).
6 Place the disc you want to use in the disc holder.

EnglisH

7