OPERATION
Remove the battery cover from the back of the remote control
and insert 2AA (fig.a) or 9V battery (fig.b) included. Replace
the battery cover.
. Restore power to ceiling fan and test for proper operation.
. The fan remote control controls the fan settings:
HI
: Turn on the fan at high speed.
MED : Turn on the fan at medium speed.
LOW : Turn on the fan at low speed.
LIGHT: ON/OFF : Press and release immediately to turn the
DIMMER :
Forward and reverse direction function
This ceiling fan is equipped with reverse switch for downward or upward air-flow.
NOTE: Do not change the direction of rotation while the fan blades are in motion.
To change direction, turn o the fan and wait for the blades to stop rotating
before setting the switch to the desired rotation direction, either forward or
reverse.
Forward function
.
On this setting, the fan will turn counter-clockwise
warmer weather to circulate hot air away from your
living space (see Fig. 11).
Reverse function
.
On this setting, the fan will turn clockwise. Use this
function during cooler weather to re-circulate warm
air (see Fig. 12).
light on or o .
Press and hold to dim or brighten lights to
the desired level and release (only for tungsten bulb).
Reverse switch
LIGHT
ON/OFF
HI
MED
Reverse
Switch housing
Forward
11
12
9
DIMMER
FAN OFF
LOW