Wiring Instructions - NOMA Loen Manuel D'instructions

ASSEMBLY
NOTE: For added security, attach safety
cable from fan unit to "J" hook in outlet
box. Secure by looping zip tie through
safety cable and "J" hook. Tighten zip
tie securely (see Fig. 7b).

4. Wiring instructions

IMPORTANT: If you are not sure if the electrical outlet outlet box and fan are grounded,
contact a licensed electrician for advice. They must be grounded for safe operation.
WARNING
before wiring.
Remote and Receiver Pairing
Codes are set by pushing the location of the dip switches locat ed on the transmitter and receiver
up or down. It is important that the code used for both the remote and receiver are identical for
the two devices to be able to communicate; otherwise the remote will not be able to control
the fan.
If you plan to install more than one fan then each fan will require the remote and receiver to
use a unique code, or else one remote will be able to control more than one fan.
Installing Receiver Assembly
Once the connection has been made, the receiver inserts into the drop rod hanging bracket.
The canopy comes up to cover the receiver and bracket .
!
!
!
!
7b
ensure
"J" hook zip tie
OPEN BATTERY HOUSING
COVER BY PRESSING
DOWN AND SLIDING OUT
7