Keyboard Functions - Lamborghini Caloreclima DOUBLE 35 Mode D'emploi

TIMER MULTIMODE PLUS
The electronic circuit is powered at 12 V (AC) 8A and the
TIMER is supplied with an external power device so that it may
be connected directly to the mains (220 V).
Even where the power is switched off (max. 3 months) the
TIMER keeps the time stored. The keys on the TIMER must be
pressed for between 0.6 and 1.2 seconds. During the
regeneration stage (both automatic and manual), the DISPLAY
shows the seconds of rotation of the motor drive as they
decrease, plus those of the CAM and the minutes of stop for the
single cycles (1C - backwash, 2C regeneration, 3C slow rinse,
4C rapid rinse).
During a regeneration it is not possible to perform any other
programming.
}
TIME
VOLUME
}
TIME
VOLUME
}
TIME
VOLUME

KEYBOARD FUNCTIONS

A DAY-TIME
B PROGRAM
C ADVANCE
D VOL/TIME
E MAN. REG.
F RESET
If lit, this indicates that the TIMER is operating on TIME.
If both lit, this indicates that the TIMER is operating on TIME-VOLUME.
If lit, this indicates that the TIMER is operating on VOLUME.
- To program the day time
- To program the regeneration cycles
- To program the various functions
- To program the regeneration cycles
- Increases the figures seen on the DISPLAY
- Selects the functioning: TIME, VOLUME, TIME-VOLUME
- Displays the figure of the water volume or the day time
- Performs immediate regeneration
- Interrupts a regeneration set off by mistake
A B C
ORA DI RIG.
GIORNO DI RIG.
ORARIO PROGRAMMA AVANZAMENTO
MULT IMOD E
BIO CO MP UR ITY SYSTEM
CALORECLIMA
D E F
TEMPO
VOLU ME
VOL. RIMANENTE
VOLU ME
VOLU ME/ORA RIG. MANUALE RESET
32