Nebula App; Prepare The Remote Control; Get Started - Anker Nebula Capsule Max Mode D'emploi

EN

2. Prepare the Remote Control

The remote control comes with two coin batteries.
① For first-time use, remove the batteries insulation tab to activate the
remote control batteries.
② To replace the batteries, slide open the battery compartment, insert
new batteries (matching the polarity (+/-) indicated), and close the
battery compartment.

3. Get Started

① For first-time use, fully charge the built-in battery using the provided
adapter.
② Hold
on the projector for 2 to 3 seconds to turn it on.
③ Turn the device towards a suitable projection surface or wall.
④ To focus the image, slightly move the projector to engage autofocus.
Or you can press and hold
focus.
⑤ For first time use, follow the on-screen instructions to complete the
basic set-up.
To give your Nebula Capsule Max the fastest, safest charge,
T
only use the provided adapter.
11
for 3 seconds to manually adjust the

Nebula App

To easily control Nebula Capsule Max, we recommend downloading the
Nebula Connect app. With this app, you can operate your mouse using the
screen.
① Download the Nebula Connect app from the App Store (iOS devices)
or Google Play (Android devices).
② Enable Bluetooth on your smartphone.
③ Open the Nebula Connect app and select [Nebula-XXXXXX] as the
device to be connected.
④ Follow the on-screen instructions to complete connection setup.
EN
12