Getting Started; Led Indication - Anker Nebula Capsule Max Mode D'emploi

EN

6. LED Indication

Button LED Status
Solid blue
Solid yellow
Solid red
Solid green
Flashing red
Flashing blue
Solid blue
09
Description
Power on / Operating in projector
mode
Standby in projector mode
Charging
Fully charged
Low battery
Ready to pair / Bluetooth is pairing /
Bluetooth disconnected (Bluetooth
speaker mode)
Bluetooth connected (Bluetooth
speaker mode)

Getting Started

1. Placement
Place Nebula Capsule Max on a stable, flat surface in front of the
projection surface. For the best results, the projection surface should
be white and flat. The distance between Nebula Capsule Max and the
projection surface must be a minimum of 0.58 meters (23 inches)
and a maximum of 3.08 meters (121 inches) to get a projection image
between 20 and 100 inches.
• It is unnecessary to tilt Nebula Capsule Max towards the
T projection surface. You can correct the projection image
with the built-in keystone correction.
• The distance between Nebula Capsule Max and the
projection surface determines the projection image size.
For the best result, position Nebula Capsule Max between
40 and 80 inches away from the projection surface.
EN
10