Samsung RT18M Serie Guide D'utilisation page 22

Installation
Installing a Water Filter (optional)
The water filter and the water filter installation kit containing necessary parts illustrated
in this section are not provided. You must purchase the water filter and the water filter
installation kit at a local hardware store.
To connect to the water supply line
07
06
05 04
09
08
1. Shut off the main water line and turn the ice maker off.
2. Locate the nearest cold potable water line.
3. Follow the instructions mentioned in the water filter installation kit.
4. After connecting the water line to the inlet of the cartridge holder with the plastic line
fully inserted, insert and tighten the filter cartridge.
5. Turn on the water line and flush 11 liters of water (approximately 6 minutes) through
the filter before use.
English
22
Untitled-6 22
01
02
03
10
01 Cold water line
02 Pipe clamp
03 Plastic line
04 Compression nut
05 Compression sleeve
06 Packing nut
07 Shut off valve
08 Filter cartridge
09 Cartridge holder
10 Cut vertically by 90 degrees
CAUTION
• The water line must be connected
outside of the refrigerator.
• Do not use copper lines.
• If cutting the tubing for resizing, make
sure the ends of the tubing are vertically
clean cut.
2020-11-11 PM 2:43:42