Tinyloc R2 FINDER Manuel D'instructions page 65

b) TIN CODE ("Tag Identification Number")
Option available for Tinyloc collars, Hound Finder model.
"TIN" stands for "Tag Identification Number". It is a code that uniquely identifies each of the
collars. The TIN code is used when the collar is not physically available. "TIN" allows users to
perform cooperative searches.
The user can provide his/her mates with the TIN code for one or more collars in order to optimize
the results of a difficult search. A dog can be searched by multiple users over a wide area.
HOW TO ADD A COLLAR:
To find the TIN that identifies each of the collars entered onto the collar's owner's R2 Finder, go to:
This code will be the one needed by any other user in order to quickly add a collar that is not
physically available so that he can cooperate in other users' searches.
To add the collar with a "TIN" code, follow these steps:
1- ADD>TIN>OK
2- Select each of the digits that the "TIN" is made up of with the side arrows on the keyboard
, press "OK" to confirm each of the numbers.
3- Once you have confirmed all the digits that make up the TIN code, select "END" and
press "OK".
4- When entering a collar by means of a TIN code, the R2 Finder will ask you to perform au-
tomatic calibration by default. In this case the automatic calibration is not possible since the
collar will not be physically available. When asked "DO YOU WISH TO CALIBRATE?", select
the "NO CALIBRATION" option and press "OK".
Figure 7
61
MENU>COLLARS>COLLAR NAME>INFO COLLAR