Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.STOP:
The treadmill is in running state, press STOP key, pause running and press it again to stop it.
3.SPEED SHORTCUT KEY (3, 6):
When the machine is running, you can press a number to adjust incline.
4. SAFETY KEY:
Emergency stop function, used for preventing runner from falling because of the fast speed. Or you need to stop
this machine immediately, pull the safety key, and then it will stop soon.
5. PROG:
When the treadmill is in waiting state, press PROG key into programme mode P1-P2.
9. MODE:
When the treadmill is in waiting state, press MODE key to select manual mode, then choose the mode during
"time decrease" "distance decrease" "calorie decrease", Press Speed+ / - key to adjust.
1. PREPARATION
1) Plug in the power line, turn on the power in the below of treadmill if you will not use the treadmill for a long
time you can close the power first
2) Attach the red safety key. If the safety key is not right position, it will not start.
2. START THE TREADMILL
Press START key, start the treadmill. The initial speed is 1.0 km/h.
3. STOP THE TREADMILL
Detach the safety key
Press "STOP" key
3 1
Under the programme, when finished, all the system is on stop.
DETAIL DATA OF PROGRAMME LIST:
Schedule 1: LCD screen P1- P2 programme motion programme
TIME
P1
TIME
2
P1
SPEED
3
P2
TIME
3
P2
SPEED
4.6
MORE OPERATIONS
3
8
3
4
6
6.6
5
5
2
6
8
7
31
3
1
5
3
6
2
5
9
7
6
EN
1
1
4
2
Publicité
Chapitres
Table des Matières
Dépannage
