Chapin 97561 Mode D'emploi page 6

5
WAND ASSEMBLY
Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve. Turn and tighten the
retaining nut clock-wise onto the shut-off valve.
6
ATTACH CHEMICAL CONCENTRATE TANK
Before chemical tank installation, attach supplied rachet straps to
strap slots on tank. Securely fasten assembly to ATV.
Note: Not all models include ratchet straps.
Attach the mix valve's suction tubing (1) to the chemical concentrate tank's quick release
port (2). Secure chemical concentrate tank with nylon webbing (3).
1 7
INSTALL DRAIN CAP
Install cap lanyard around drain plug. Screw
drain cap (H-5) on drain plug.
Wand
3
H-5
3E
O-ring
Retaining Nut
1
Shut-off
Valve
Assembled
2