Chapin 97561 Mode D'emploi page 5

3
INSTALL WAND CLIPS
4
ATTACH HOSE TO DIVERTING VALVE
Guide wand hose (C-1) through loop
clamp (H-6) and attach hose (C-1) to
diverting valve (C-4) with hose clamp
(H-3). Tighten clamp (H-3).
C-1
H-6
H-4
H-4
H-2
Install wand clip (H-4) and wand clip from nylon strap (as
shown above) with screws (H-2).
Note: The wand clip shown to the right can be found hanging
from the nylon strap.
H-6
C-1
2E
H-2
H-3
C-4