Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use and care
Use the correct tool for your application. The correct
tool will do the job better and safer.
Do not use the tool if the switch does not turn it on
and off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Store idle tool out of the reach of children and do not
allow persons unfamiliar with the tool or these
instructions to operate the tool. Tools are dangerous in
the hands of untrained users.
Maintain tools. Check for misalignment or binding of
moving parts, breakage of parts and any other
condition that may affect the operation. If damaged,
tool repaired before use. Many accidents are caused by
poorly maintained tools.
Use the tool, accessories, etc., in accordance with
these instructions and in the manner intended for the
particular type of tool, taking into account the
working conditions and the work to be performed.
Use of the tool for operations different from those
intended could result in a hazardous situation.
Service
Have your tool serviced by a qualified repair person
using only identical replacement parts. This will
ensure that the safety of the tool is maintained.
Develop a periodic maintenance schedule for tool.
When cleaning a tool be careful not to disassemble
any portion of the tool since internal wires may be
misplaced or pinched or may be improperly mounted.
Certain cleaning agents such as gasoline, carbon
tetrachloride, ammonia, etc. may damage plastic parts.
SAVE THESE INSTRUCTIONS.
-7-
Publicité
Table des Matières
