Returning To Default Settings - HP LT4700 Guide De L'utilisateur

To change an input label by using the remote control:
1
Press the Menu button to open the OSD. The
available menus appear as a list.
2
Press the down arrow button to highlight the
Setup menu, and then press the OK button.
3
Press the down arrow button to move within the
menu and highlight the Input Labels option, and
then press OK to move into the option.
4
Press the down arrow button to highlight the input
source that you want to change, and then press the
right arrow button. Press the down arrow button to
select the new label, and then press OK to enter
the change.
5
When you are finished, press the Menu button to
close the OSD.

Returning to Default Settings

You can use the Default Settings menu to return all
settings, including the input labels, to the default value.
Select Default Settings, and then press the OK
button.
This option does not reset the channels in the Fav and
the channel list. These items are cleared only when you
run a new channel scan.
Changing the TV Settings
43