Safety Instructions - Beko DD109 Instructions D'installation Et De Fonctionnement

Safety instructions

1 Safety instructions
Please check whether this manual corresponds with the instruments type.
Please observe all notes indicated in this instruction manual. It contains essential information
which have to be observed during installation, operation and maintenance. Therefore this
instruction manual has to be read categorically by the technician as well as by the responsible
user / qualified personnel before installation, initiation and maintenance.
This instruction manual has to be available at the operation site of data display at any time.
Regional respectively national regulations have to be observed in addition to this instruction
manual, if necessary.
In case of any obscurities or questions with regard to this manual or to the instrument please
contact BEKO TECHNOLOGIES.
Warning!
Supply voltage!
Contact with supply voltage carrying non-insulated parts may cause an electric shock
with injury and death.
Measures :
• Observe all applicable regulations for electrical installations (e. g. VDE 0100)!
• Carry out maintenance work only in deenergized state!
• All electric works are only allowed to be carried out by authorized qualified personnel.
Warning !
Inadmissible operating parameters !
Undercutting or exceeding of limit values may cause danger to persons and material
and may lead to functional and operational disturbances.
Measures :
• Make sure that the data display is only operated within the admissible limit values indicated on the
type label.
• Careful observation of the performance data of the data display in connection with the application.
• Do not exceed the admissible storage and transportation temperature.
4 Data Display DD109