Safety Warnings; Personal Protective Equipment; Operating - DeVilbiss Compact HVLP Manuel D'utilisation

Masquer les pouces Voir aussi pour Compact HVLP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY WARNINGS

Fire and explosion
Solvents and coating materials
can be highly flammable or
combustible
ALWAYS refer to the coating material
suppliers instructions and COSHH
sheets before using this equipment
Users must comply with all local
and national codes of practice
a n d
i n s u r a n c e
r e q u i r e m e n t s
ventilation,
operation and house-keeping of working
areas
This equipment, as supplied,
is NOT suitable for use with
Halogenated Hydrocarbons.
Static
Electricity
generated by fluid and/or air
passing through hoses, by the
spraying process and by cleaning non-
conductive parts with cloths. To prevent
ignition sources from static discharges,
earth continuity must be maintained to
the
spraygun
and
equipment used. It is essential to use
conductive air and/or fluid hoses.
Personal Protective
Equipment
Toxic vapours – When sprayed,
certain
poisonous, create irritation or be
otherwise harmful to health.
Always read all labels and safety data
sheets for the material before spraying
and follow any recommendations. If In
Doubt, Contact Your Material Supplier
The use of respiratory protective
equipment is recommended at all
times. The type of equipment
must be compatible with the material
being sprayed.
when
sprayed.
c o m p a n y
g o v e r n i n g
fire
precautions,
can
other
metallic
materials
may
Always wear eye protection when
spraying or cleaning the spraygun
Gloves
must
spraying
or
equipment
Training – Personnel should be given
adequate training in the safe use of
spraying equipment.
Never aim a spraygun at any part of the
body
Never exceed the max. recommended
safe working pressure for the equipment
The fitting of non-recommended or non-
original spares may create hazards
be
Before cleaning or maintenance, all
pressure must be isolated and relieved
from the equipment
The product should be cleaned using a
gun washing machine. However, this
equipment should not be left inside gun
washing machines for prolonged periods
of time.
Noise Levels
The A-weighted sound level of
sprayguns may exceed 85 dB
(A) depending on the set-up
being used. Details of actual
be
noise levels are available on request. It is
recommended that ear protection is worn
at all times when spraying.
Spray Equipment using high pressures
may be subject to recoil forces. Under
certain circumstances, such forces could
result in repetitive strain injury to the
operator.
3
be
worn
when
cleaning
the
Misuse

Operating

© 2005 ITW Finishing Systems and Products
E
E

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Compact trans-techCompact

Table des Matières