Klarfit Ultimate Gym 3000 Mode D'emploi page 29

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care
of the following hints to avoid damages. Any failure caused by ignoring the items and cautions
mentioned in the instruction manual is not covered by our warranty and any liability. Scan the
QR code to get access to the latest user mannual and other information about the product.
CONTENT
Safety Instructions 30
Components Overview 31
Parts List 32
Assembly 40
Warming up before a Workout 47
Training Guide 48
PRODUCER
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
CARE AND MAINTENANCE
Note: As with all training equipment with mechanical, moving components, screws may loosen as a result of frequent use of
this product. We therefore recommend that you check them regularly and, if necessary, tighten them with a suitable key. Clean
your training device regularly with a damp cloth to clean the surfaces of sweat and dust.
• Clean the device regularly with a clean cloth to maintain a clean appearance.
• Safe use of the device can only be guaranteed if the device is regularly checked for damage and wear (e.g. to handles, pedals,
saddles, etc.). It is essential that damaged parts are replaced and that the unit is not reused until it has been repaired.
• Check regularly that bolts and nuts are properly tightened.
• Grease moving parts of the unit regularly.
EN
29