Appliance Description; Intended Use; Operation - Inventum HB75 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2

appliance description

1.
Heated overblanket
2.
Mains plug
3.
Mains cable
4.
Controller
5.
Indicator light
6.
Sliding switch for ON/OFF and temperature settings
7.
Plug-in coupling
3

intended use

CAUTION
This heated overblanket is only designed to warm up the human body.
4

operation

4.1 Safety
CAUTION
This heated overblanket is fitted with the INVENTUM SAFETY SYSTEM (ISS). This electronic sensor technology prevents the
entire surface of the heated overblanket from overheating by automatically switching off in the event of a fault. If the safety
system switches off the heated overblanket automatically as a result of a fault, the settings are no longer illuminated even
when the heated overblanket is switched on.
Please note that, after a fault has occurred, the heated overblanket can no longer be used for safety reasons and must be
sent to the service address indicated.
4.2 Initial use
• First, connect the controller to the heated overblanket by inserting the plug-in coupling.
• Then plug in the supply plug into the mains outlet.
4.3 Switching on
To switch on the heated overblanket, set the slider for ON/OFF and temperature settings to setting 1, 2, 3, 4, 5 or 6. The temperature
setting is illuminated when switched on [5].
4.4 Setting the temperature
Setting 0:
OFF
Setting 1:
minimum heat
Setting 2-5: individual heat setting
Setting 6:
maximum heat
5
6
4
7
2
3
1
13
English

Publicité

Table des Matières
loading

Table des Matières