Appliance Description; Intended Use; Operation - Inventum HZ31 Mode D'emploi

2

appliance description

HZ30/HZ31
Electric foot warmer
Size: 26 x 26 x 32 cm
Switch with 3 illuminated settings
Automatic switch off after 90 minutes
Removable lining hand washable
100 Watt
1. Illuminated display for temperature settings
2. Mains plug
3. Sliding switch for ON/OFF and temperature settings
4. Mains cable
5. Control
6. Foot warmer
3

intended use

CAUTION
This foot warmer is intende only for heating human feet.
4

operation

4.1 Safety
CAUTION
• The foot warmer has been provided with the INVENTUM SAFETY SYSTEM (ISS). This sensor technology prevents
overheating of the foot warmer on the entire surface through automatic deactivation in case of breakdown. If the SAFETY
SYSTEM has switched off the foot warmer, the temperature levels in activated condition are no longer lighted.
• Do note that for reasons of safety the foot warmer can no longer be used after a breakdown and should be sent to the
indicated service address.
4.2 Initial use
CAUTION
Make sure the foot warmer does not fold or crumple during use.
• Insert the plug in the socket.
4.3 Switching on
To switch on the foot warmer, set the slider for ON/OFF and temperature settings to setting 1, 2 or 3. The temperature setting is
illuminated when switched on.
14
• English
1
2
3
4
5
6