Storage; Disposal; Problems & Solutions; Technical Data - Inventum HB75 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAUTION
• Do not attach the heated overblanket to washing lines with washing pegs or similar. Otherwise the heated overblanket
may be damaged.
• Only reconnect the controller to the heated overblanket after the connector and the heated overblanket are completely
dry. Otherwise the heated overblanket may be damaged.
• Under no circumstances switch on the heated overblanket to dry it. Otherwise, there is a risk of an electric shock.
6

storage

If you do not plan to use the heated overblanket for a long period of time, we recommend that you store it in the original packaging. For
this purpose, disconnect the controller from the heated overblanket by unplugging the plug-in coupling.
CAUTION
Allow the heated overblanket to cool down before folding.
Otherwise the heated overblanket may be damaged.
Do not crease the heated overblanket by placing items on top of it
during storage.
7

disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of
the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive – WEEE
(Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible
for waste disposal.
8
problems & solutions
Problem
The temperature settings are not illuminated while
- the controller is fully connected to the heated
overblanket;
- the supply plug is connected to the mains outlet with
correct function;
- the setting is 1, 2, 3, 4, 5 or 6.
9

technical data

See the type plate label on the heated overblanket.
Cause
The safety system switched
off the heated overblanket
irreversible.
Remedy
Send the heated overblanket together
with the controller to the service
department.
English
15

Publicité

Table des Matières
loading

Table des Matières