Inventum HB75 Mode D'emploi page 12

controller specified on the label.
• The electrical and magnetic fields emitted by this heated overblanket
may interfere with the function of a pacemaker. However, they are
still well within the limits: electrical field strength: max. 5000 V/m,
magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1
millitesla. Please consult your doctor and the manufacturer of your
pacemaker before using this heated overblanket.
• Do not pull, twist or make sharp bends in the cables.
• This heated overblanket must be examined frequently for signs of
wear or damage. If there are such signs, if the heated overblanket
has been mis-used or does not work, return it to the supplier before
switching it on again.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similar qualified persons in order to
avoid a hazard.
• While this heated overblanket is switched on
– never place any objects on it (e.g. suitcase or washing basket)
– never place any heat source on it (e.g. hot water bottle, heating pad
or similar).
• When in use, the electronic components in the controll of the heated
overblanket make the controll slightly warm. The controll should
therefore never be covered or placed on the heated overblanket when
it is in operation.
• If you should have any questions about using our devices, please
contact Customer Services.
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
12
• English