AKO PLATINUM PV-Monitor Instructions D'installation Et D'emploi page 49

To change the maximum power of the inverter in PV-Monitor:
 Select desired inverter.
 Insert maximum power Pac max in column Pac max (W).
Use the value for maximum DC power from the inverter data
sheet.
PV-Monitor only uses the maximum power for the diagram display in
the tab Current. If the maximum power Pac max is not being input,
PV-Monitor 1 uses W as an initial value.
PV-Monitor updates the value of the maximum power Pac max with
the highest measured value. If the measured value is higher, PV-
Monitor overwrites the input value.
Inverter search
Enables the search for inverters.
To search for inverters:
 Click on Inverter search.
PV-Monitor searches for inverters.
Detected inverters are shown in List of inverters.
Installation and operating manual: PLATINUM PV-Monitor
Date 02/2009
Mat.-No. 717 553
PLATINUM PV-Monitor
Operation
Pac max
Note
21