TaoTronics Hello Mode D'emploi page 5

Control Functions
Function Operation
Press and hold the Power Button
Power On / Off
for 3 seconds
When powered on, press the Power
Pairing
Button twice to start pairing
Slide the Mode Switch to and
Mode Switch
from TX and RX
In RX mode, press the Power Button
Play / Pause
once to play / pause music
In RX mode, press and hold the
Volume + / -
Volume + / - Button
Next / Previous In RX mode, press the
Volume + / - Button once
Track
Note:
The mode can only be successfully switched after the adapter
is turned off for 5 seconds. After the switch, the pairing history of
the devices will be cleared.
If the TT-BA08 cannot pair with your Bluetooth device, please
turn the device off for 5 seconds and then switch it from RX
mode to TX mode. Turn the device off again and then after 5
seconds, switch it back to RX mode.
LED Indicators
LED Indicator Status
Charging
Solid Red LED
LED Off Fully charged
Flashing Red
Pairing in TX / RX mode
and Blue
Low battery
Flashing Red
Successfully paired
Solid Blue LED
Powered on but not paired
Flashing Blue
with Bluetooth devices
®
05/06