Valore VS-1000C Plus Guide D'installation Et D'utilisation page 9

Add a Filter Gasket (Part 3) into Elbow Connector
(Part 14) first. Then attach the Elbow Connector
(Part 14) to the Brass Extender Joint (Part 15),
turn clock wise to tighten.
• After all connections have been completed
inside the shower panel, it is ready to be
hung on the shower wall for installation.
• There are three height positions to select from.
• 10" of clearance between the overhead shower
and the top of the tallest user's head is
recommended.
• Place the shower panel on the desired bracket
position.
• Raise the shower panel and rest it against the
bracket until the support strut is resting snugly
in the desired bracket position.
• Once a snug and secure fit is achieved and all
the parts on the PVC Supply Line are secured
to the back of the shower panel, sealant may
be applied to seal the gap between the shower
panel body and the wall to prevent water from
entering behind the shower panel.
INSTALLATION INSTRUCTIONS
7
8
- 9 -
15