Valore VS-1000C Plus Guide D'installation Et D'utilisation page 15

1
• Loosen the nut securing the PVC Flexible hose to
the brass valve body.
2 3
• Using needle nose pliers, grip the edge of the check
valve and pull straight out..
5 2
• Ensure the check valve is flush with the top of the valve
body inlet.
How to Replace the Check Valve
Check Valve
Level
- 15 -
2 2
• Disconnect the PVC hose from the valve body and
remove the Filter Gasket (#3).
2 4
• Place the new check valve into the valve body.
Observe the direction of the valve is correct.
2 6
3
• Place the filter gasket (#3) back in place and secure the
PVC hose to the valve body to complete the install.
3
Check Valve