HP LC4776N Mode D'emploi page 23

Standard Definition Input: Connect an
■
S-Video cable, or a composite video cable, and
left-right audio cables from the cable or satellite
set-top box. (Audio L and R connectors are shared
within the AV connector set.)
The AV Input connectors are:
1: S-Vid or Video, and Audio L and R
■
2: S-Vid or Video, and Audio L and R
■
n
The Standard Definition Input (S-Vid, or
Video) connectors do not pass high-
definition TV signals.
To connect the set-top box:
c
CAUTION: Unplug power for the TV and all
connected components before connecting
the set-top box.
1
Connect the set-top box input source cable(s) to
the rear of the TV, using one of the connector sets:
Digital High Definition Input: Connect
■
an HDMI cable to any of the HDMI
connectors: HDMI 1, HDMI 2, or HDMI 3
(select models only).
Or
Connect a DVI-D cable and DVI-to-HDMI
converter (from digital, high-definition cable or
satellite set-top box with a DVI connector) to
HDMI 1, and left-right audio cables to HDMI
Audio In L and R.
Component High Definition Input:
■
Connect component video cables and left-right
audio cables to the Component connectors:
1: Y, Pb, and Pr, and Audio L and R
■
Or
2: Y, Pb, and Pr, and Audio L and R
Standard Definition Input: Connect an
■
S-Video cable, or a composite video cable,
and left-right audio cables to the AV Input
connectors:
1: S-Vid or Video, and Audio L and R
■
Or
2: S-Vid or Video, and Audio L and R
S-Vid connection
Video connection
Setting Up the TV
13