Description Of The Appliance And Components; Installation - GNC DayLight Manuel D'installation, D'utilisation Et D'entretien

ENG

5. DESCRIPTION OF THE APPLIANCE AND COMPONENTS

The appliance is designed to be installed suspended on the tank through two stainless steel cables anchored to the ceiling. The installation of the
device has been designed to reduce installation time. The electrical connections are all on the connector to better manage the assembly and pos-
sible technical assistance.
The appliance consists of:
Body of the lamp (6), Cables and supports for fixing (5), Power cable (1), Power supply with cable (3), Controller AirLink WiFi (4), lamp cable (2).

6. INSTALLATION

The installation of this product is simple and does not require special equipment. We recommend to install at least in two people. CAUTION to the
edges of the lamp body (plastic and aluminium) which may be SHARP.
To assemble the product proceed as follows:
Fix the terminals of the suspension cables to the ceiling with wheelbase measures of 406 mm, centrally located over the tank.
Use appropriate Stop to support the weight of the lamp.
Insert the cable ends with control cylinder, with ballpoint termination, in the holes of the plexiglass lens.