Transporting The Product; Setting Up The Product - CARAVITA PRIMUS Instructions De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation
4.3

Transporting the product

The product is easy to transport without additional aids.
Due to its weight and size, two people are required to transport the product.
NOTICE
Property damage due to cracks and bent ribs
Lack of care during transport may damage the canopy.
Do not drag the parasol over the ground by holding the canopy fabric or the protective cover.
I
Do not carry the parasol by holding individual ribs.
I
4.4

Setting up the product

CAUTION
Danger of injury from tipping over!
Lack of care can cause the parasol to tip over on account of its high weight.
Two people are required to install the parasol.
I
The base must be heavy enough to prevent the parasol from tipping over in high winds when closed.
I
Preparation
For safety reasons, the parasol should be set up by at least two people.
I
Prepare the mobile base or ground sleeve as instructed by the manufacturer.
I
The mobile base must be sufficiently heavy.
I
Have the stainless steel screws and the hex key contained in the scope of delivery available.
I
Remove the protective cover from the canopy.
I
Have a power drill ready.
I
Installing the aluminium cap on the canopy
The protective cover is removed and the canopy is lying on a clean surface.
30 | 84
To transport the parasol, grasp around it with both hands.
1 The fixing screws are inserted in the aluminium finial.
2 Place the aluminium finial on the tip of the canopy.
4000259 [v0]/2022-01-01

Publicité

Table des Matières
loading

Table des Matières