Roller Grill WARM IT SIMPLE Notice D'installation Et D'utilisation page 13

Fill the bottle in 3/4, put it in the Warm It, turn the thermostat control knob (n°2 on pic-
ture) on the 75°C position (during 15 min). The pilot light (n°1 on picture) ignites.
Once the 15min are over, set the thermostat on the 60°C position
Keep the machine on during use as the temperature is regulated by the thermostat
1
1
On/off pilot light
Thermostat/commutator
2
5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Place it on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materi-
als even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Unpack all the accessories, clean and dry them.
b) First starting:
Fill the bottle in 3/4.
First cleaning
Clean the device before the first use. (See 6. Cleaning)
2
3
3 Switch
13