C.M.O Electro Power IC Mode D'emploi page 17

USE :
 Put under charge both batteries before using the tool.
 When a battery has not been used for a long time it is better to put it under charge before using
the tool.
 To remove the battery from the tool, press the red buttons on both sides of the battery at the
same time (fig.1).
 To insert the battery, bring the battery cartridge into line with the handgrip. Be sure that it is well
assembled before starting any operation.
 Do not force the battery into the tool, if it does not insert easily it means that it has not been
inserted in the correct manner.
fig.1
15