Features; Dew Sensor Circuit; High Temperature Sensor Circuit; Abnormal Voltage Sensor Circuit - JVC KV-V8 Manuel D'instructions

4

Features

5 4-heads stereo Hi-Fi video cassette player
5 Mountable in either vertical or horizontal posture
thanks to the highly reliable vibration-resistant
design
Protection circuits
(self-diagnosing circuits)
This video cassette player incorporates some protec-
tion circuits inside.
If this video cassette player is used as it is dewed, it
may damage the tape and video heads.

Dew sensor circuit

5 When the cabin whose temperature is consider-
ably low is rapidly heated or the humidity in the
cabin is considerably high, insides of the wind-
screen and cabin windows are sometimes fogged.
At the same time, inside of the video cassette player
mounted on the car is dewed.
5 In such the case (dewed condition), the dew sensor
circuit functions to stop machine operation with
indication of blinking
and "DEW PLEASE WAIT" appears on the screen.
When the machine falls into such the status, wait
for several hours until the
blinking and lights continuously.

ACCESSORIES

• Check to see if the following accessories are supplied with the video cassette player.
AV cord
(5 m/16.7ft. long)
Mounting bracket x 2
Tapping screw (φ 5 x 20 mm) x 4
Screw (M5 x 8 mm) x 4
Velcro tape x 2 sets
indicator lamp in green,
indicator lamp stops
Power cord
(5.5m/18.2ft. long)
Remote controller

High temperature sensor circuit

5 When the temperature of the machine becomes
considerably high, the high temperature sensor
circuit functions to stop machine operation with
indication of blinking
and "HIGH TEMP PLEASE WAIT" appears on the
screen. When the machine falls into such the sta-
tus, turn off the machine and wait for a while
until the indicator lamp stops blinking while
leaving it in a cool place to lower the tempera-
ture. When turning on the machine again, make
sure that the
before starting operation.

Abnormal voltage sensor circuit

5 When the source loop circuit of the machine detects
voltage out of the operation range, the abnormal
voltage sensor circuit functions to turn off the machine
with indication of blinking the
in orange, and "VOLTAGE PLEASE CHECK" appears
on the screen.
In such a case, make sure that the machine is
connected properly or battery voltage is sufficient.
Note: This video cassette player should be used
with DC12V only.

Tape protection circuit

5 When the machine remains in the still playback or
slow playback mode for 5 minutes or longer, the tape
protection circuit functions to stop mode the ma-
chine for protecting the tape.
Remote sensor unit
indicator lamp in red,
indicator lamp does not blink
indicator lamp
Remote control data cord
(5m/16.7ft. long)
Round battery
(CR2025)