ARGENTO Active Bike Mode D'emploi page 12

Active Sport instructions
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Install the folding system ring
• Adjust the stem closing mechanism*
MODEL REFERENCE PICTURE
Active Sport
Active Bike wheel assembly instructions
* ADJUSTMENT
Outside the mechanism there is a hex socket
screw. If the handlebar stem is not very stable after
closing, adjust the screw in the mechanism, by
tightening or loosening it as required to increase
the stability of the stem.
11