Technical Data - Star Progetti 206S/1 Instruction Pour Le Montage

3. MANUAL - TURNING THE REMOTE CONTROL SWITCH ON AND OFF
1. Plug in the remote control switch.
2. Press the 'ON/OFF' button on the remote control switch. The remote control switch is on and the
green (LED) indicator light is on.
3. Press the 'ON/OFF' button again. The remote control switch and indicator light are both off.
4. FAULT FINDING
NO ACTIVATION:
Check remove the battery insulator
•
Check battery polarity or running out of battery of the remote control
•
Check code program successful
•

5. TECHNICAL DATA

Remote control with 2 Preset channels, it operate on 2 areas
•
Remote control standby current: <5μA
•
Working temperature range: 0°C – 35°C
•
Range: 30 m without obstacles (also works where spaces are separated by walls)
•
Just plug-in receiver into wall outlet.
•
For indoor and outdoor use, IP44
•
RADIO FREQUENCY
VOLTAGE
POWER
6.USER TIPS
For your convenience you can use only one remote control for two or more remote switches code 206.
433.92 MHz
230–240V 50/60HZ
3680 Watt (max per outlet)
6