Orbit 28954 Manuel De L'utilisateur page 11

Days of the Week
• Your dial should be set to [HOW OFTEN].
- Press the PRoGRAM button to select which
program you'd like to set
- Press the [   ] buttons to move from one day
to another .
- Press [+] or [ENTER] to select a day for watering.
A frame will appear around the selected days .
• To delete a previously entered day, press [-] or
[CleAR] .
example: Monday, Wednesday, & Friday
Intervals
• Use the [   ] buttons to move to the INTeRVAl
option "INT" .
• Press [+/–] buttons to select the number of days
between watering .
example: An interval of 1 will water every day; an
interval of 3 will water every 3rd day, etc .
11
Odd or Even Days
• Use the [   ] buttons to move to the odd or
eVeN day
watering .
- Press [+] or [ENTER]
• selecting a different option or pressing clear will
erase the previous selection .
example: odd: 1st, 3rd, 5th, etc .
example: even: 2nd, 4th, 6th, etc .
Turn the dial to [AUTo] and that's it!
You have programmed your timer!
Turn dial to [AUTo] to activate your program .
Note: If your program is lost, the factory installed fail-
safe program will turn on each station every day for 10
minutes.
Note: Your prior programming will not be disturbed
unless altered. Always be aware of the program you are
in (A or B) when you are making changes.
Reviewing and Changing Your Program
If you want to review or change the start times,
run times, or how often to water, simply follow the
directions again for that option . After reviewing or
changing a watering schedule, remember to turn the
dial back to [AUTo] for automatic operation .