Starting In Setting Mode - Panasonic WX-CH457P Mode D'emploi

w Starting in setting mode
p
1
Rotate the microphone boom to turn off the power of this product.
2
Rotate the microphone boom while holding down the [S] and [VOL] buttons to
turn on the power of this product.
p ● This product starts in setting mode and a beep sound can be heard. Also, the setting
indicator blinks.
3
Press the [VOL] button to switch the setting item.
p ● In setting mode, the setting indicator blinks as shown below according to the setting
item. When this product starts in setting mode, "Talk button setting" is selected.
Talk button setting
Page button setting
Voice prompt setting
Unused
Talk/Page Auto Off setting
Initialization
Center Module model selection
Headset Microphone Gain
Talkback
: lit, : off
4
Configure the setting of each item.
p ● Set the setting items with the following operations.
WX-CH457P_PUQX1020ZAV1.indb 35
[S] button
[VOL] button
Setting indicator
2021/07/02
35
14:31:24