Before Installation; Accessories - Daikin FFQ09Q2VJU Manuel D'installation

Before Installation

Leave the unit inside its packaging until you reach the installation site. Where unpacking is unavoidable, use a sling of soft
material or protective plates together with a rope when lifting, this to avoid damage or scratches to the unit.
When unpacking the unit or when moving the unit after unpacking, be sure to lift the unit by holding on to the hanger bracket
without exerting any pressure on other parts, especially on refrigerant piping, drain piping and other resin parts.
Refer to the installation manual of the outdoor unit for items not described in this manual.
Caution concerning refrigerant series R410A:
The connectable outdoor units must be designed exclusively for R410A.
Precautions
Do not install or operate the unit in places mentioned below.
- Where corrosive gas like sulphurous gas exists. (Copper tubing and brazed spots may corrode.)
- Where machines generating electromagnetic waves exist. (Control system may malfunction.)
inside vehicles or vessels.
When selecting the installation site, use the supplied template for installation.
Do not install accessories on the casing directly. Drilling holes in the casing may damage electrical wires and consequently cause

Accessories

A Drain hose
Template
(cut out from upper
part of packing)
J Sealing pad (large)
N Washer for conduit
3
B Clamp metal
1
F Screws (M5)
(for template)
1
K Sealing pad
(medium A)
1
P Operation manual
1
C Washer for hanger
bracket
1
G Fitting insulation
(for gas pipe)
4
L Sealing pad
(medium B)
1
Q Installation manual
1
D Clamp
8
H Fitting insulation
(for liquid pipe)
1
M Sealing pad (small)
1
R Warranty
1
English
7
1
1
1