Olympus CAMEDIA C-700 Ultra Zoom Manuel De Base page 8

NAME OF PARTS — Viewfinder/Monitor indications
(Shooting information) (Cont.)
0
Exposure lock
AEL : AE lock
● The exposure is locked until single-frame shooting is performed. After you shoot, the
indication disappears.
MEMO : AE memory
● The exposure is locked and retained in memory even after shooting.
!
Drive mode
● Displayed when the drive mode is selected by pressing the DRIVE button.
No indication: Single-frame shooting,
shooting, : Self-timer shooting, BKT: Auto bracket
@
Spot Metering/Macro mode
● Displayed when the Spot Metering/Macro mode is selected by pressing the
(Macro/Spot) button.
No indication: Spot Metering/Macro off,
Metering/Macro
#
White balance
● Displayed when WB is set on the Menu.
No indication: Auto,
Fluorescent,
$
ISO
● Displays the ISO (AUTO, 100, 200, 400 or 800) selected on the Menu. When set to
AUTO, the ISO changes to 100 when the Mode dial is set to A/S/M. When AUTO is
selected, the ISO is automatically increased in low-light situations when the flash is
not used. This is to prevent blurring from camera shake.
%
Manual Focus
● Displayed when locking focus using the Manual focus function.
^
AF confirmation mark
● Lights when the focus and exposure are locked by pressing the Shutter button
halfway. If the subject is out of focus, the mark blinks.
8
9
^
&
*
SLOW1
(
AEL / MEMO
: Daylight,
: One touch white balance
MF
0
!
@
#
$
%
: Sequential shooting,
: Spot metering,
: Overcast,
: AF Sequential
: Macro, : Spot
: Tungsten light, :