Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FAN mode
You can ventilate your room. In this mode the air is circulated, creating a 'breeze feeling',
but the room will not be cooled. When the device is powered on, it will automatically start in
FAN mode.
The FAN mode is always 'active' when the device is powered on and additional features
(Cooling mode & Ionizing) can be activated.
You can select the required FAN speed as described in "FAN speed"
FAN speed
When the device is powered on, it automatically starts in FAN mode - Normal airflow in low
FAN speed.
Repeatedly press the fan Speed button on the device
or remote control
B
until the
4
required FAN speed has been selected. There are 3 selectable FAN speeds; low, medium
& high speed.
While pressing, a beep sounds and the selected FAN speed is indicated on the display
panel.
FAN airflow
The device has 3 selectable mode functions: normal – natural - sleep.
Press the mode button on the device
to select the desired mode.
F
or remote control
6
• Normal = regular fixed FAN speed (FAN speed is selectable: low – medium – high)
• Natural wind = varying FAN speeds, giving a natural wind breeze with some high-speed
breezes.
• Sleeping wind = varying gentle FAN speeds, giving a natural wind breeze. After 30
minutes, the speed is reduced by one level to run at low varying speed.
While pressing, a beep sounds and the selected airflow LED indicator lights up on the
display panel.
Swing mode
To control the horizontal direction (up/down) of the airflow, adjust the louver in the air outlet
by hand.
2
To control the vertical (left/right) direction of the airflow, press the Swing button on the
device
. While pressing, a beep sounds and the swing LED indicator
or remote control
D
3
lights up on the display panel.
Cooling mode
When using the device in cooling mode, the water tank needs to be filled with cold
water!
Note! When there is no water, or the water level is too low in the water tank, the cool LED
indicator will flash on the display panel and the cool function cannot be activated.
on the device or remote control
. While pressing, a beep
Press the Cool button
C
3
sounds and the cool LED indicator lights up on the display panel.
The cold water is circulated to generate a cool breeze.
EN 07
Publicité
Table des Matières
