Assembling The Refrigerator Door; Assembling The Freezer Door - LG LTNS16121V Manuel Du Propriétaire

11 INSTALLATION
3.
Carefully lift up the refrigerator door from the
bottom hinge pin. Place it on a non-scratching
surface.
Bottom Hinge
Pin

Assembling the Refrigerator Door

1.
Lower the refrigerator door onto the bottom
hinge pin.
2.
Place the hinge pin of the middle hinge bracket
inside of the hinge pin insert on top of the door.
Hold the door in place and line the middle hinge
bracket with the holes in the refrigerator housing.
Middle Hinge
Bracket
Hinge Pin
Insert
3.
Insert and tighten the two bolts with the socket
wrench to refasten the middle hinge bracket to
the refrigerator housing.
Middle Hinge
Bracket
Bolt

Assembling the Freezer Door

1.
Set the freezer door onto the middle hinge pin.
Middle Hinge Bracket
2.
Place the top hinge pin in the top of the freezer
door and line up the upper hinge with the holes
on top of the refrigerator. Use the three bolts to
replace the hinge.
Hinge
Pin
3.
Carefully place the top hinge cover back into
place over the hinge and use the screw to replace
it.
NOTE: Before place the top hinge cover make
sure that all wires are not being pressed by the
cover hinge.
Hinge Pin
Top Hinge
Top Hinge Pin
Clockwise to replace