Peaq PDR150BT-B/W Mode D'emploi page 27

Connections
CHARGING BATTERY
Plug the Micro USB connector into the Micro
USB charging socket on the radio. Connect
the USB A connector with an active USB
port or to the provided adaptor. Plug the
adaptor to an outlet.
Note: The radio can be operated via the in-
built batteries. Playing time is dependent on
parameters such as mode, volume, etc.
HEADPHONES
Headphones with a 3.5 mm jack can be
connected to the headphone output. Note:
When headphones are connected the loud-
speaker will be silent.
IM_PDR150_150116_V03_HR.indb 27
AUX IN
You can also listen to external audio devices
by connecting the cable (not included in de-
livery) into the AUX IN jack.
Settings
ADJUSTING THE AERIAL
Pull out the aerial, turn and swivel it so it fac-
es upwards for best reception.
VOLUME
ENGLISH
27
16/1/15 5:03 PM