Measuring Blood Pressure - Inventum BC 16 Mode D'emploi

Applying the blood pressure monitor
• Apply the blood pressure computer
to the inside of the left wrist.
• Ensure that the wrist is unclothed.
• Close the cuff with the velcro
fastener, so that the top margin
of the computer is about 10 mm
below the ball of the thumb (see
illustration).
The cuff must be placed tightly around the wrist but must not constrict.

Measuring blood pressure

• Sit in a relaxed position.
• Ensure that your arm is supported and bend it so that it is at the level of your
heart (see illustration).
• Before measurement allow an adequate relaxation time of 5 minutes.
• Press the user-switching key „
the " " key 2x to start measurement in the chosen memory zone. After
checking the display with all digits lighting up, the monitor will automatically inflate.
• The cuff will now inflate automatically to 180 mmHg.
" to select a memory zone, and press
49