Product Overview - Elecro Engineering CYGNET Aquatic Mode D'emploi

Important Notes!
Thank you for purchasing the CYGNET Aquatic Heater manufactured in
England to the highest standards.
To ensure your new heater will give years of trouble free service please
carefully read the following instructions.
Incorrect installation will affect your warranty.
Do not discard this manual, please retain for future reference.
The appliance is not to be used by children. The appliance is not to be used
by persons with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or
instruction.

Product Overview

Heater 'ON'
Indicator (red)
LH End fitting
Fig 1.
Heruntergeladen von manualslib.de
Thermal safety
Cut-out
re-set switch
Flow tube
Foot /Carrier – A
Handbücher-Suchmachiene
Temperature
set
point dial
Top cover
RH End Fitting
Foot / Carrier—B
www.elecro.co.uk
Flow switch
Hosetail Stepped
Connector
1¼" (32mm) or
1½" (38mm)
1