Samsung NX36R9966P Serie Manuel D'utilisation page 29

NOTE
The Temperature probe operation will shut off automatically when the temperature
reaches the temperature you set.
NX9900R_CHEF_NX36R9966PS_AA_DG68-01105A-00_EN+MES+CFR.indb 29
2. Insert the temperature probe plug into
the socket on the right side wall of the
oven.
Turn the mode selector knob from
3.
OFF to Bake, Pro Convection ,
Convection Bake or Convection
Roast. Rotate the temperature selector
knob from the OFF position to set the
temperature. You can set the oven to
any temperature from LO to 550 °F.
4. Press the Probe button, and then set
the internal temperature between
100 °F to 200 °F by pressing <, >.
5. Tap the OK button. When the food
reaches the set internal temperature,
the oven automatically shuts off, and
then beeps.
Temperature table
Type of food
Rare
Beef/Lamb Medium
Well done
Pork
Poultry
CAUTION
• To protect the temperature probe, be careful not to insert the probe so that it
comes out of the meat. Make sure that the probe is inserted around the center
of the meat.
• Do not store the probe in the oven.
• Do not leave the probe inside the oven during the Self-Cleaning or Broiling
cycle. This will cause permanent damage to the probe.
• To avoid damage to the probe, defrost food in advance.
• Do not use tongs when inserting or removing the probe. Tongs can damage
the probe.
• Use the temperature probe only for the applicable cooking operations.
NOTE
If you have covered meat with aluminum foil and leave it for 10 minutes after
cooking is complete, the internal temperature increases by 5-10 °F degrees.
Internal temperature (°F)
140-150
160-170
175-185
175-185
185-195
English 29
2019-01-15 3:05:03